What is the speed adjustment method of hydraulic overturning plow? Let's introduce it to you.
Longitudinal water increase adjustment. After the horizontal leveling adjustment of the plow frame is completed, the plow frame shall be adjusted longitudinally and horizontally in the trial tillage. During trial tillage, observe whether the large frame (or inclined beam) of the plow is horizontal. If the front is high and the rear is low, which makes it difficult for the large frame of the plow to enter the soil or plough too shallow, shorten the upper pull rod; On the contrary, the upper tie rod shall be extended. At this time, it should be noted that the longitudinal horizontal adjustment is carried out on the premise of ensuring the transverse horizontal state after completing the transverse horizontal adjustment, and its adjustment is limited to adjusting the upper tie rod. If the lower tie rod is adjusted to change its length, it is bound to cause horizontal damage to the plow frame of the whole machine. At this time, even if the plow frame reaches the horizontal state in one farming state (such as turning right), it is difficult to ensure that the plow frame can be in the horizontal state in another farming state (turning left).